IBM 8835 Hardware Maintenance Manual - Page 70
illustrations
UPC - 000435158314
View all IBM 8835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
SCSI backplane Complete the following steps to remove the SCSI backplane. This component contains an "HDD BACKPLN" label. Note: v Read "Installation guidelines" on page 25. v Read the safety notices at "Safety information" on page 101. v Read "Handling static-sensitive devices" on page 25. 1. Turn off the server. 2. Disconnect all power cords and external cables from the back of the server. 3. Remove the server from the rack. 4. Pull out the hard disk drives. 5. Remove the server cover (see "Removing the cover and bezel" on page 27). 6. Disconnect the cables from the SCSI backplane. Note: The illustrations in this publication might differ slightly from your hardware. Retention notches Retention tabs 7. Gently pull up on the backplane until it is released from the server at the notches; then, pull the backplane out of the server. To replace the SCSI backplane, reverse the previous steps, making sure to align the tabs and notches. 60 325 Type 8835: Hardware Maintenance Manual and Troubleshooting Guide Eserver