Icom IC-9100 Instruction Manual - Page 121

8 DV MODE OPERATION D Message Transmission You can select a message channel (TM1-TM5) to turn ON the message transmission function. When a message channel is selected, the transceiver transmits the pre-programmed text message. The default setting is OFF. q S et the operating frequency, call signs and other settings, such as those for repeater operation, as desired. w In the DV mode, push [MENU] one or more times to display the "M3" screen (Menu 3). • In the DR mode, push [MENU] once or twice to select the "D1" screen. e P ush [DSET](F-5) to display the "DSET" screen. r P ush [TXM](F-3) to display the "TXM" screen (Transmit message). t R otate [MAIN DIAL] to select the desired transmit message channel, then push [SET](F-5). • TM1 to TM5 are selectable. • W hen OFF is selected, the message is not transmitted. y P ush [MENU] to return to the "DSET" screen. u P ush [PTT] on the microphone to transmit the message. (or push [TRANSMIT] on the transceiver) • T he message is transmitted each time you push [PTT] (or [TRANSMIT]). • T he message is automatically transmitted every 30 sec- onds during continuous transmission. • The MAIN Band TX/RX indicator lights red. D RX message display q In the DV mode, push [MENU] one or more times to display the "M3" screen (Menu 3). • In the DR mode, push [MENU] once or twice to select the "D1" screen. w P ush [CD](F-2) to display the "CD" screen (Call Record). e R otate [MAIN DIAL] to select the desired record channel (RX01 to RX20). r P ush [Z](F-1) three times to select "MSG" item. • The received message is displayed. t P ush [Z](F-1) or [MENU] to return to the record channel, selected in step e. NOTE: Up to 20 messages can be stored, but only one message can be stored for each call sign. The oldest message is cleared when 21st message is received. [TRANSMIT] [DSET]/[SET] MAIN Band [MENU] [TXM] TX/RX indicator [MAIN DIAL] TXM ≈ TM1: EDT SET ✔ For your information When a call with a message is received, the call sign and the message scrolls across the function display. The received call sign and/or message display functions can be turned OFF in the DV SET mode, if desired. ➥ "RX Message Disp" item (p. 119) ➥ "RX Call Sign Disp" item (p. 119) [√] [CD] [MENU] [MAIN DIAL] CD ≈ JG3YMK Ú �JA3YUA RX01 CLR COPY After selecting the record channel, push [Z](F-1) three times. CD MSG: REPEATER IS JP3 Ú YHH A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 112