Icom IC-9100 Instruction Manual - Page 143

134

9

GPS/GPS-A OPERATION

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

GPS Auto TX

11.

(Default: OFF)

Select the desired interval from OFF, 5, 10, 30 sec-

onds, 1, 3, 5, 10 or 30 minutes for automatic position

data transmission.

The current position data, received from a GPS re-

ceiver, is transmitted at the selected interval when

“GPS” or “GPS-A” is selected as the “GPS TX Mode”

option as described below.

The GPS message is transmitted as well as the posi-

tion data, if it is programmed.

Even if this setting is set to OFF, you can manually

transmit the position data by pushing [TRANSMIT] or

[PTT] (microphone).

NOTE:

• When four GPS sentences are selected at the

same time, “5sec” cannot be selected.

• When “Manual” is selected in “My Position,” the

current position data will not be automatically

transmitted.

GPS TX Mode

12.

(Default: Disable)

Select the GPS or GPS-A operating mode to transmit

the position data from a GPS receiver, or turn OFF the

function.

NOTE:

When “GPS” or “GPS-A” is selected, low-

speed data communication cannot be used.

GPS Sentence (RMC)

13.

*

1

(Default: OFF)

Turn the GPS sentence formatter “RMC” ON or OFF.

GPS Sentence (GGA)

14.

*

1

(Default: ON)

Turn the GPS sentence formatter “GGA” ON or OFF.

GPS Sentence (GLL)

15.

*

1

(Default: OFF)

Turn the GPS sentence formatter “GLL” ON or OFF.

GPS Sentence (GSA)

16.

*

1

(Default: OFF)

Turn the GPS sentence formatter “GSA” ON or OFF.

GPS Sentence (VTG)

17.

*

1

(Default: OFF)

Turn the GPS sentence formatter “VTG” ON or OFF.

GPS Sentence (GSV)

18.

*

1

(Default: OFF)

Turn the GPS sentence formatter “GSV” ON or OFF.

NOTE for GPS sentences:

• Up to four GPS sentences are usable at the same

time.

• See page 122 for GPS sentence setting details.

Unproto Address

19.

*

2

(Default: API910,DSTAR

✱

)

Enter an unproto address of up to 56 characters. The

manually programmed data can be memorized.

• Unproto address programming

q

Push [EDT](F-4) to enter the unproto address edit

mode.

w

Push [F-1] one or more times to select the desired

character type.

Character type

Selectable characters

ABC

A to Z

abc

a to z

etc

!#$%&\?

" ’ ` ^ + –

✱

⁄.,:;=<>

( ) [ ] { } ¦ _ ¯ @

e

Rotate [MAIN DIAL] to select the ﬁrst character or

symbol to input.

• When entering number or a decimal point, push the ap

-

propriate keypad key.

• Push [DEL](F-4) to delete the selected character, sym

-

bol or number.

• Push [SPC](F-5) to input a space.

• When all 56 characters have been

programmed, an

error beep sounds. If you want to reprogram, push [

Ω

]

(F-2) or [

≈

](F-3) to select a character, then push [DEL]

(F-4) to delete it.

r

Push [

Ω

](F-2) to move the cursor backward, or push

[

≈

](F-3) to move the cursor forward.

t

Repeat steps

w

through

r

to program an unproto

address of up to 56 characters.

y

Push [MENU] to save the unproto address, and re-

turn to the “SET” screen.

*

1

Appears when “GPS” is selected in “GPS TX Mode.”

*

2

Appears when “GPS-A” is selected in “GPS TX Mode.”

Icom IC-9100 Instruction Manual - Page 143

GPS Sentence RMC, GPS Sentence GGA, GPS Sentence GLL, GPS Sentence GSA, GPS Sentence VTG, GPS - dstar

Page 143 highlights