Icom ID-52A Instructions - Page 5
Setting up from a PC using a microSD card
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Setting up from a PC using a microSD card To setup from a PC using a microSD card, follow the steps described below. Step 1 Saving the setting data onto a PC Step 2 Making an Initial setup Step 3 Editing the parameters (p. 6) Step 4 Writing the setting data to the transceiver (p. 6) NOTE: If you use a brand new microSD card, first format the card using the transceiver. See the ID-52A/ID-52E Basic Manual for details on the formatting procedure. Step 1 Saving the setting data onto a PC 1. Save the transceiver's setting data onto the microSD card. L Insert a microSD card into the transceiver, and save the setting data from "Save Setting" on the transceiver's MENU screen. ( [MENU] > SET > SD Card > Save Setting) 2. Turn OFF the transceiver, and then remove the microSD card. 3. Insert the card into the PC's card slot or an external card reader, as shown below. 4. Copy the transceiver's setting data (ICF file), stored in the "Setting" folder of the card to a PC local folder. "Setting" folder Transceiver NOTE: When "USB Connect" is set to "SD Card Mode" on the transceiver and the microSD or card transceiver is connected to the PC through a data communication compatible USB cable, you can directly access the microSD card Into a card reader PC Into the microSD card slot that is set in the transceiver from the PC. ([MENU] > SET > Function > USB Connect) Step 2 Making an Initial setup When you start the CS-52, the Initial Setup window is displayed. Before using the software, follow the steps below to make a initial setup to send the transceiver version information. 1. Click the "microSD" radio button. 2. Click to display the data file selection window. 3. Select the setting data (ICF file) copied from the transceiver in step 4 of "Saving the setting data onto a PC," as described above. 4. Click to open the programming screen and read the selected file. NOTE: • When the transceiver version information is not correctly sent to the software, some items may not be displayed on the software. • If you want to make the initial setup again, select "CS-52 Initial Setup" in the Windows Start menu. ((Windows logo) > START > CS-52 > CS-52 Initial Setup) 1 Click 2 Click and select a file 3 Click 5