Icom ID-52A Ci-v Reference Guide english

Icom ID-52A Manual

Get Icom ID-52A PDF manuals and user guides View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals

Icom ID-52A manual content summary:

  • Icom ID-52A | Ci-v Reference Guide english - Page 1
    CI-V REFERENCE GUIDE VHF/UHF TRANSCEIVER ID-52A ID-52E
  • Icom ID-52A | Ci-v Reference Guide english - Page 2
    message 9 •• DV RX Status setting 9 •• GPS/D-PRS data 9 •• GPS/D-PRS message 12 •• DV TX data 12 •• DV RX data (transceive 12 •• MY position data 12 •• Manually input position data 12 1
  • Icom ID-52A | Ci-v Reference Guide english - Page 3
    on the transceiver. ID-52A/E USB cable (User supplied) PC Micro-B To a USB port To the [USB] port Type-A,or Type-C To use the USB cable between the transceiver and a PC, you must first install a USB driver. The latest USB driver and installation guide can be downloaded from the Icom website
  • Icom ID-52A | Ci-v Reference Guide english - Page 4
    jack is not guaranteed. See the CT-17 instruction manual for details of remotely controlling transceivers and receivers. Power supply 9 V～15 V DC PC RS-232C cable ct-17 2-conductor 3�5 mm (1/8 inch) plug must be used� ID-52A/E Connections ID-52A/E side 3�5 mm (1/8 inch) SP* GND* 3-conductor 3�5 mm
  • Icom ID-52A | Ci-v Reference Guide english - Page 5
    command numbers. A data area or sub command is added for some commands. Controller to ID-52A/E q w ert y u FE FE A6 E0 Cn Sc Data area FD OK fixed) FE FE E0 A6 Cn Sc Data area FD q w ert y u ID-52A/E to controller FE FE E0 A6 FA FD NG message to controller DDCommand table Command
  • Icom ID-52A | Ci-v Reference Guide english - Page 6
    (R)) Turn OFF the transceiver Turn ON the transceiver Read the transceiver ID Send/read the Repeater tone frequency Send/read the TSQL tone frequency read the internal GPS OFF (00=OFF, 01=Internal GPS, 03=Manual) Send/read the manually input position data Send/read TX output power setting (00=OFF,
  • Icom ID-52A | Ci-v Reference Guide english - Page 7
    REMOTE CONTROL Remote control (CI-V) information DDCommand formats •• Operating frequency Command: 00, 03, 05 1 X0 2 XX 3 XX 4 XX 5 0X 10 Hz digit: 0, 5 (Depends on the 100 Hz digit�) 1 Hz digit: (fixed) 1 kHz digit: 0 ~ 9 100 Hz digit: 0, 2, 5, 7 100 kHz digit: 0 ~ 9 10 kHz digit: 0 ~ 9 10
  • Icom ID-52A | Ci-v Reference Guide english - Page 8
    . •• DTCS code and polarity setting Command: 1B 02 qwe XX0XXX Receive polarity: 0: Normal 1: Reverse Transmit polarity: 0: Normal 1: Reverse Refer to the Advanced manual for the DTCS code list. •• Digital code squelch setting Command: 1B 07 q XX •• DV MY call sign setting Command: 1F 00 Set your
  • Icom ID-52A | Ci-v Reference Guide english - Page 9
    REMOTE CONTROL Remote control (CI-V) information DDCommand formats •• DV TX message setting Command: 1 F 02 Set the transmit message of up to 20 characters. See "Codes for character entries." "FF" stops sending or reading messages. Codes for character entries Character A ~ Z 0 ~ 9 ¯ ASCII
  • Icom ID-52A | Ci-v Reference Guide english - Page 10
    REMOTE CONTROL Remote control (CI-V) information DDCommand formats •• DV RX message Command: 2 0 0101, 20 0102 1 ~ 20 21 ~ 28 29 ~ 32 X X X X X X X X X X X X 1 ~ 20: Message (20 characters) 21 ~ 28: Call sign of the caller station (8 characters) 29 ~ 32: Note of the caller station (4
  • Icom ID-52A | Ci-v Reference Guide english - Page 11
    REMOTE CONTROL Remote control (CI-V) information DDCommand formats •• GPS/D-PRS data Position Command: 20 03 0100, 20 03 0200 1 ~ 9 10 11 12 ~ 16 0 0 X X X X X X X X X X X X Data number 17 ~ 22 23 ~ 26 27 28 X X X X X X X X X X X X Object Command: 20 03 0101, 20 03 0201 1 ~ 9 10
  • Icom ID-52A | Ci-v Reference Guide english - Page 12
    REMOTE CONTROL Remote control (CI-V) information DDCommand formats •• GPS/D-PRS data Item Command: 20 03 0102, 20 03 0202 1 ~ 9 10 11 12 ~ 16 0 2 X X X X X X X X X X X X Data number 17 ~ 22 23 ~ 26 27 28 X X X X X X X X X X X X 29 ~ 31 32 33 34 35 X X X X X X X X X X X X 36 ~
  • Icom ID-52A | Ci-v Reference Guide english - Page 13
    ~ 20: Speed (0.1 km/h steps) 21 ~ 27: D ate (UTC: yyyymmddHHMMSS) (y: Year, m: Month, d: Day, H: Hour, M: Minute, S: Second) •• Manually input position data Command: 23 02 q w e r t y u i o !0 !1 !*2 !*3 !*4 !*5 XXXXXXX0 0X0XXXXXXXX0 0XXXXXXX0X Latitude Longitude Altitude 1 ~ 5: Latitude (dd
  • Icom ID-52A | Ci-v Reference Guide english - Page 14
    A7608-6EX © 2020 Icom Inc. Dec. 2020 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
CI-V REFERENCE GUIDE
VHF/UHF TRANSCEIVER
ID-52A
ID-52E