Icom ID-52A Ci-v Reference Guide english - Page 10

REMOTE CONTROL Remote control (CI-V) information DDCommand formats •• DV RX message Command: 2 0 0101, 20 0102 1 ~ 20 21 ~ 28 29 ~ 32 X X X X X X X X X X X X 1 ~ 20: Message (20 characters) 21 ~ 28: Call sign of the caller station (8 characters) 29 ~ 32: Note of the caller station (4 characters) See "Codes for character entries." (p. 8) LLFF: W hen no call sign is received since the transceiver power was turned ON. Example: When a Gateway call is received JPJM1Y1IZULKpocrat Alli�n��g from RXRPT2 GW RXRPT1 INTERNET JM1ZLK calling from JP1YIU port A��� CALLED JJMP11ZYLIKU cpaolrlitnAg��f�rom CALLER YOUR STATION CALLER: Caller's call sign CALLED: Called station call sign RXRPT1: C all sign of the repeater that was accessed by the caller station LLIf it was a call through a gateway and the internet, this item displays the gateway call sign of the repeater you received the call from. RXRPT2: C all sign of the repeater you received the call from •• DV RX Status setting Command: 20 0201, 20 0202 Data Function bit7 0 (Fixed) bit6 0/1 Receiving a voice call bit5 0/1 Last call finisher bit4 0/1 Receiving a signal bit3 0/1 Receiving a BK call bit2 0/1 Receiving a EMR call Receiving a bit1 0/1 signal other than DV bit0 0/1 Packet loss status Description - While receiving a digital voice signal, select "1." (Regardless of DSQL and CSQL setting) When the last call was finished by you, select "1." When the audio tone can be heard, select "1." While receiving a BK call, select "1." While receiving a EMR call, select "1." When "DV" and "FM" are blinking, select "1." While displaying packet loss, "1" is returned. •• GPS/D-PRS data Command: 20 03 0100, 0101, 0102, 0103, 0200, 0201, 0202, 0203 Data number and description Data number 00 01 02 03 Description D-PRS - Position D-PRS - Object D-PRS - Item D-PRS - Weather 9