Image Fitness 17.0 R Treadmill English Manual - Page 16

16

When the first period is completed,

all speed set-

tings will move one column to the left

. The speed

setting for the second period will then be shown in

the flashing Current Period column and the tread-

mill will automatically adjust to the speed and in-

cline settings for the second period. Note: If all five

of the indicators in the Current Period column are

lit,

the speed settings may move downward

so that

only the highest indicators appear in the matrix.

The program will continue in this way until the

speed setting for the last period is shown in the

Current Period column and the last period ends.

The walking belt will then slow to a stop.

If the speed or incline setting for the current period

is too high or too low, you can manually override

the setting by pressing the Speed or Incline but-

tons. Every few times a Speed button is pressed,

an additional indicator will appear or disappear in

the Current Period column; if any of the columns

to the right of the Current Period column have the

same number of lit indicators as the Current

Period column, an additional indicator may appear

or disappear in those columns as well.

Important:

When the current period of the program ends,

the treadmill will automatically adjust to the

speed and incline settings for the next period.

To stop the program temporarily, press the Stop

button. The time will begin to flash in the display.

To restart the program, press the Start button or

the Speed increase button. The walking belt will

begin to move at 1 mph. When the next period of

the program begins, the treadmill will automatically

adjust to the speed and incline settings for the

next period. To end the program, press the Stop

button, remove the key, and then reinsert the key.

Follow your progress with the display.

See step 5 on page 13.

Measure your heart rate if desired.


Turn on the workout fan if desired.


When the program is completed, remove the

key from the console.


THE INFORMATION MODE/DEMO MODE

The console features an information mode that keeps

track of treadmill usage information and allows you to

select a unit of measurement for the console.

To select the information mode, insert the key into the

console while holding down the Stop button, and then

release the Stop button. When the information mode is

selected, the following information will be shown:

An “E” (for English) or an “M”

(for metric) will appear in the

lower right corner of the dis-

play. Press the Speed in-

crease button to change the

unit of measurement, if de-

sired.

IMPORTANT:

If a “d” appears in the display, the

console is in the “demo” mode. This mode is intended

to be used only when a treadmill is displayed in a store.

When the console is in the demo mode, the power cord

can be plugged in, the key can be removed from the

console, and the display will remain lit, although the

buttons will not operate.

If a “d” appears when the in-

formation mode is selected, press the Speed de-

crease button so the “d” disappears.

The upper left corner of the

display will show the total

number of

thousands

of

steps taken by all users of

the treadmill. For example,

the number 396 would indi-

cate 396,000 steps taken.

The lower left corner of the

display will show the total

number of hours that the

treadmill has been used and

the total number of miles (or

kilometers) that the walking

belt has moved.

To exit the information mode, remove the key from the

console.

7

6

5

4

Image Fitness 17.0 R Treadmill English Manual - Page 16

The Information Mode/demo Mode

Page 16 highlights