Image Fitness 17.0 R Treadmill English Manual - Page 6
Assembly
View all Image Fitness 17.0 R Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included allen wrenches and your own phillips screwdriver , rubber mallet , adjustable wrench , and wire cutters . For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, check to see if it has been pre-assembled. Nut (47)-4 1/4" Star Washer (21)-2 Handrail Star Washer (19)-4 Upright Star Washer (39)-4 Frame Washer (33)-2 Console Wheel Spacer (44)-4 Bolt (22)-2 Silver Ground Screw (27)-2 3/4" Screw (2)-8 Endcap Screw (95)-4 Wheel Bolt (89)-2 Handrail Bolt (20)-4 Frame Bolt (32)-2 1. Make sure that the power cord is unplugged. 1 Have a second person hold the Upright Base (48) in the position shown, with the wheel holes at the top. Identify the Left Upright (31), which is marked with a sticker. Orient the Left Upright so the indicated bracket is in the position shown, and attach the Left Upright to the Upright Base with two Upright Bolts (40) and two Upright Star Washers (39). Do not tighten the Upright Bolts yet. 6 Upright Bolt (40)-4 Wheel Holes Bracket 48 31 39 40