Image Fitness 5.0 Bench User Manual - Page 6
Assembly - press
View all Image Fitness 5.0 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Make Things Easier for Yourself Everything in this manual is designed to ensure that the weight bench can be assembled successfully by anyone. However, it is important to realize that the versatile weight bench has many parts and that the assembly process will take time. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two people. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. • For help identifying small parts, use the PART IDENTIFICATION CHART on page 5. The following tools (not included) are required for assembly: • Two adjustable wrenches • One rubber mallet • One standard screwdriver • One Phillips screwdriver • Lubricant, such as grease or petroleum jelly, and soapy water. Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. Before beginning assembly, make sure you 1 understand the information in the box above. Important: Some of the parts described in the assembly steps may be pre-assembled. 2 Press a 2" x 3" Square Inner Cap (50) into the end of the Right Base (22). Identify the Right Upright (2) by the positions of the numbers and holes. Attach the Right Upright to the Right Base (22) with two M10 x 62mm Carriage Bolts (74) and two M10 Nylon Locknuts (77). Note: Be sure that the numbers on the Right Upright are on the side shown. Do not tighten the Nylon Locknuts yet. Repeat this step with the Left Base (23) and Left Upright (1). Note: Be sure the numbers on the Left Upright are on the side shown in the inset drawing. Numbers on this side 77 Holes on this side Numbers on this side 1 23 77 50 6 22 74