Image Fitness 5.0 Bench User Manual - Page 8
Attach the Left Frame 6 to the Center Frame
View all Image Fitness 5.0 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
6. Press two 75mm Bushings (26) into the top and bottom of the Right Weight Rest (12). 6 Pull the Knob (30) out as far as it will go. Slide the Right Weight Rest (12) onto the Right Upright (2) and engage the Knob into an adjustment hole in the Upright. Turn the Knob clockwise until tight. Repeat this step with the Left Weight Rest (not shown). 26 30 12 26 2 7. Press two 60mm Square Inner Caps (46) into the top of the Left and Right Uprights (1, 2). Orient the Center Frame (4) with the decal on the side shown. Attach the Center Frame to the Left and Right Uprights (1, 2) with four M10 x 78mm Bolts (70), four M10 Washers (79), and four M10 Nylon Locknuts (77). Do not tighten the Nylon Locknuts yet. 8. Press two 38.1mm x 76.2mm Inner Caps (49) into the end of the Right and Left Frames (5, 6). Attach the Right and Left Frames (5, 6) to the Center Upright (3) with an M10 x 81mm Bolt (65) and an M10 Nylon Locknut (77). Attach the Right Frame (5) to the Center Frame (4) with an M10 x 120mm Bolt (75), an M10 Washer (79), and an M10 Nylon Locknut (77). Attach the Left Frame (6) to the Center Frame in the same manner. Do not tighten the M10 Nylon Locknuts (77) yet. 9. Press a 60mm Square Arched Inner Cap (89) into the end of the Top Frame (9). Attach the Top Frame (9) to the Right and Left Frames (5, 6) with two M10 x 81mm Bolts (65) and two M10 Nylon Locknuts (77). Do not tighten the Nylon Locknuts yet. 7 46 70 77 79 8 49 9 70 4 77 79 Decal 70 2 77 70 46 1 77 79 77 5 6 65 3 77 79 75 4 79 49 75 77 9 89 5 6 65 8