Image Fitness 910 Treadmill Owners Manual - Page 11
treadmill.
View all Image Fitness 910 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CIRCUIT BREAKER If the treadmill stops or will not start, check the circuit breaker located on the front of the frame near the power cord. The circuit breaker is designed to protect the electrical system. If the circuit breaker has tripped, the switch will protrude as shown. To reset the circuit breaker, allow the treadmill to cool for a few minutes and then push the switch back in. Tripped Reset PULSE EARCLIP If the pulse earclip does not function properly, the earclip should be cleaned. Press the earclip open, and wipe the small, clear circles inside using a cotton swab saturated with denatured alcohol. STORAGE Always unplug the power cord when the treadmill is not in use. To convert the treadmill to the storage position, first remove the bolt and nut from the lower end of the side rail. Store the bolt and nut in a secure location. Remove the side rail from the handrail. Loosen the lock knob and lay the upright post on the treadmill. 11