Image Fitness 910 Treadmill Owners Manual - Page 6

<>.

Page 6 highlights

ASSEMBLY Set the treadmill in a cleared area and remove all packing materials. Be sure that all parts are Included before disposing of the packing materials. Refer to the Part List and Exploded Drawing on pages 14 and 15 for help with part identification, if necessary. 1. Insert the Lock Knob (31), with the Lock Knob Washer (30) into the Upright Post (11). Place the Upright Spacer (80) on the end of the Lock Knob. Hold the Spacer in place and raise the Upright Post to a vertical position, being careful not to pinch your fingers. Turn the Knob clockwise until it is almost tight. Leave a little play in the Upright Post for the following steps. 11 11 11 3310 80 2. Align the upper end of the Side Rail (1) with the left end of the Handrail (12). Turn the Handrail in the direction shown to thread the Handrail into the Side Rail. (Note: If the Handrail will not turn easily, loosen the Handrail Bolt [9] slightly.) Tighten the Handrail and the Handrail Bolt. 3. Align the lower end of the Side Rail (1) with the hole in the side of the treadmill Frame (53). Insert the Side Rail Bolt (69) through the Side Rail and Frame. Reach under the Frame and thread the Side Rail Nut (70) onto the end of the Bolt. Tighten the Lock Knob (see step 1). Make sure that all parts are tightened securely before using the treadmill. . 12 9 1 69 v 53 i 70 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

ASSEMBLY
Set
the
treadmill
in
a
cleared
area
and
remove
all
packing
materials.
Be
sure
that
all
parts
are
Included
before
disposing
of
the
packing
materials.
Refer
to
the
Part
List
and
Exploded
Drawing
on
pages
14
and
15
for
help
with
part
identification,
if
necessary.
1.
Insert
the
Lock
Knob
(31),
with
the
Lock
Knob
Washer
(30)
into
the
Upright
Post
(11).
Place
the
Upright
Spacer
(80)
on
the
end
of
the
Lock
Knob.
Hold
the
Spacer
in
place
and
raise
the
Upright
Post
to
a
vertical
position,
being
careful
not
to
pinch
your
fingers.
Turn
the
Knob
clockwise
until
it
is
almost
tight.
Leave
a
little
play
in
the
Upright
Post
for
the
following
steps.
2.
Align
the
upper
end
of
the
Side
Rail
(1)
with
the
left
end
of
the
Handrail
(12).
Turn
the
Handrail
in
the
direction
shown
to
thread
the
Handrail
into
the
Side
Rail.
(Note:
If
the
Handrail
will
not
turn
easily,
loosen
the
Handrail
Bolt
[9]
slightly.)
Tighten
the
Handrail
and
the
Handrail
Bolt.
3.
Align
the
lower
end
of
the
Side
Rail
(1)
with
the
hole
in
the
side
of
the
treadmill
Frame
(53).
Insert
the
Side
Rail
Bolt
(69)
through
the
Side
Rail
and
Frame.
Reach
under
the
Frame
and
thread
the
Side
Rail
Nut
(70)
onto
the
end
of
the
Bolt.
Tighten
the
Lock
Knob
(see
step
1).
Make
sure
that
all
parts
are
tightened
securely
before
using
the
treadmill.
6
11
1
1
11
31
30
80
12
<>.
9
1
v
i
69
53
70