Insignia IS-TVHD30 User Manual (English) - Page 23

IS-TVHD30 30" HD-Ready TV Watching a TV program To watch a TV program when your HD-Ready TV is connected to an outside antenna or to cable TV without a converter box: 1 Turn on your HD-Ready TV. 2 Press the CH + or CH - button to tune to a channel. Or If you want to direct tune a channel: • For a one-digit channel number, press the -/-- button until - appears, then press the number button for the channel. • For a two-digit channel number, press the -/-- button until -appears, then press the number buttons for the channel. • For a three-digit channel number, press the -/-- button until --- appears, then press the number buttons for the channel. Or If you want to scan for a channel, press the SCAN button. Your HD-Ready TV scans all channels one by one. Each channel appears for a few seconds. When you see a channel you want to watch, press the SCAN button. To watch a TV program when your HD-Ready TV is connected to a cable TV converter box or satellite box: 1 Turn on your HD-Ready TV. 2 Set your HD-Ready TV to the output channel of the converter box or satellite box (usually 3 or 4). 3 Use the converter box or satellite box to select channels. Selecting the picture mode You can select a picture mode to improve the video display. Each picture mode has its own picture settings such as color, brightness, contrast, sharpness, and tint. To select the picture mode: • Press the PICTURE button one or more times to cycle through the available picture modes. You can select: • Movie-select for finely detailed images. • Standard-select for most TV programs • Sport-select for bright images. • Personal-when you make adjustments to the picture settings in the OSD, these settings are stored in the Personal picture mode. 22 www.insignia-products.com