Insignia NS-24L120A13 User Manual (English) - Page 15

Insignia 24" LCD TV Using composite video (good) To connect a cable or satellite box using composite video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the AV IN VIDEO jack and L/R AUDIO jacks on the back of your TV and to the composite video and audio out jacks on the cable or satellite box. Note • The AV IN VIDEO jack shares the AV IN L/R AUDIO jacks with the COMPONENT IN video jacks. • When you connect the audio using the AV IN L/R AUDIO jacks, the audio output is analog. Cables are often color-coded to match color-coded jacks. Cable or satellite box Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE jack on the back of your TV and to the coaxial out jack on the cable or satellite box. Cable or satellite box Coaxial cable AV cable PC / DVI DIGITAL COMPONENT IN AUDIO IN OUTPUT Y PB PR AV IN VIDEO L - AUDIO - R ANT Back of TV 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite TV box. 5 Go through the Setup Wizard on page 19. DIGITAL COMPONENT IN OUTPUT Y PB PR AV IN VIDEO L - AUDIO - R ANT / CABLE Back of TV 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite TV box. 5 Go through the Setup Wizard on page 19. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. www.insigniaproducts.com 11