Insignia NS-DXA1 User Manual - Page 17

Insignia NS-DXA1 Coupon Eligible Converter Box Troubleshooting Problem Solution No power. Fragmented picture and unclear sound. No picture. Normal picture but no sound. Picture is distorted. Available channels are missing. You forgot your password. The remote control does not work correctly. • Make sure that the power cord is plugged securely into a power outlet. • Check your antenna input, location, and signal strength. • Select the Auto Tuning or Manual Scan functions, if you have not already done so. • Make sure that all the cables are installed correctly and that the correct source is selected on your TV (for example, CH 3, CH 4, Video 1, or Video 2). • The antenna signal strength may be low. Check the signal strength and adjust the antenna location and direction. For more information about connections, see "Connecting an antenna" on page 4. • Check volume levels. • Make sure that the TV sound is not muted. • Make sure that the your converter box is connected correctly. • Make sure that the correct aspect ratio is selected. • Make sure that the video output is connected to the TV. • You can find all the available channels by running the Auto Tuning or EZ Add in the on-screen menu system. • Adjust the antenna. • Check the antenna's signal strength. Enter the master password 7777. • Point the remote control at the remote sensor on your converter box. • Operate the remote control within 23 feet (7 meters) of the remote sensor. • Remove any obstacles between the remote control and the remote sensor. • Replace dead batteries with new ones. Specifications Design and specifications are subject to change without prior notice. General Television system Channel coverage Dimensions (W × H × D) Net weight Operating temperature Operating humidity Power requirement Power consumption DTV standard ATSC Terrestrial 2-69 Approximately 8.5 × 1.8 × 6.4 inches (215 × 46 × 162 mm) Approximately 1.65 lbs. (0.75 kg) 41°F to 104°F (5°C to 40°C) 5% to 90% 120V 60 Hz AC 7 W Input/output Antenna in (From Antenna) Antenna out (To TV (RF)) Video output Audio output Accessories Antenna input, ATSC, 75 Ohms Antenna output, 75 Ohms, RF output channel 3 or 4 (switchable) 1.0 V (p-p), 75 Ohms, negative sync, RCA jack (1) 2.0 Vrms (1 KHz, 0 dB), 600 Ohms, RCA jack (L, R) (1) RF cable (1) Video cable (1) Audio (L/R) cable (1) Remote control (1) Battery (size AAA) (1) Quick Start Guide (1) User Guide(1) Legal notices FCC warning This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the product and • receiver. • Connect the product into an outlet on a circuit different • from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician • for help. Warning Do not attempt to modify your converter box in any way without written authorization from Insignia. Unauthorized modification could void the user's authority to operate this products. Your converter box is intended to receive and decode signals transmitted according to the ATSC Digital Television Standard A/53 specification and is intended to be used with an appropriate antenna and display device that you must provide. Energy Star® As an Energy Star Partner, Insignia has determined that his product or product models meet the Energy Star guidelines for energy efficiency. www.insignia-products.com 15