Insignia NS-DXA1 User Manual - Page 7
Using your converter box, Tuning your converter box on or off, Setting the output channel
View all Insignia NS-DXA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Insignia NS-DXA1 Coupon Eligible Converter Box 6 After the channel search is complete, press . The Time Zone screen opens. To set the output channel: 1 Press MENU. The SETUP menu opens. 7 Press or to select a time zone, then press . The THANK YOU screen opens. 8 Press to complete the setup and close the Install Guide. Using your converter box Tuning your converter box on or off To turn your converter box on or off: 1 Make sure that the TV is connected to your converter box and that the TV and your converter box are plugged into power outlets. 2 Press POWER. The power LED lights. • Red-Standby mode • Blue-ON mode • Blinking-Receiving remote control signal 3 If this is the first time you have turned on your converter box, follow the on-screen prompts to set basic options. For more information, see "Setting basic options" on page 4. 4 To turn off your converter box, press POWER again. Setting the output channel If the TV is connected through the To TV (RF) jack, you need to set the output channel for the TV signal. The TV must be tuned to the same channel as output channel. 2 Press or to select Output Channel, then press or . 3 Press or to select channel 3 or 4, then press . Changing channels To change channels: • Press CH or CH to select a channel in the memorized channel list. • Press the number buttons for the channel you want. If you want a digital sub channel, press the number buttons for the main channel, press -, then press the number for the sub channel. For more information about sub channels, see "Digital sub channels" on page 2. When you use the number buttons to select a channel, the Channel List appears. Press or to select the channel, then press . • Press RECALL to return to the last channel you were watching. • Press FAV to select a channel from the Favorites list. Adjusting the volume To adjust the volume: • Press VOL + or VOL - to increase or decrease the volume. • Press MUTE to turn off the sound. Press MUTE again to restore the sound. Warning If the volume is set too high when you press MUTE to restore the sound, you may damage your hearing or the TV speakers. Note For best performance, set the volume control on the TV to mid-range, then use the converter box remote control to adjust the volume. www.insignia-products.com 5