Insignia NS-LCD26F User Manual (English) - Page 13

Insignia NS-LCD26F/NS-LCD32F LCD TV On-screen menu TIMER Options SLEEP TIMER-Lets you set the sleep timer to turn off the TV after a preselected interval. CLOCK-Lets you set the clock, which is shown when the DISPLAY button is pressed. TIME OFF-Lets you set a specific time for the TV to turn off. WAKE TIME-Lets you set a specific time to watch a program. WAKE CHAN.-Lets you set a specific channel to watch in the Wake Time you set. Troubleshooting Please check the following items before calling for service: Problem Solution No picture or sound. Check all cable connections. Make sure that the TV is plugged in and turned on. Make sure that electricity is available at the AC power outlet. Picture is OK, but no sound. Check the volume level and mute settings. Switch to another channel to determine if the station is the problem. No picture Make sure that the TV is working properly. Press the INPUT button to select TV input. Make sure the color system is set correctly. Sound is OK, but no Check the color control and adjust it. color. Check the program's color features, because it may be a black and white movie. The picture has Make sure that the antenna is installed overlapped images. correctly. If not, adjust the antenna toward the broadcasting station. Picture has "snow." Check the antenna and its connection. If there are problems, correct them. If all connections are tight, the problem may be with a faulty antenna or cable. Check whether car traffic or neon signs disturb the image. Stripes on picture. Check for interference from other electronic devices, such as radios and televisions, and keep magnetic or electronic devices away from the TV. Remote control does not work. Change the batteries in the remote control. Remove any obstacles between the TV's IR sensor and the remote control. Image is not clear. In VGA mode, adjust the PHASE control. Image is not centered. Adjust the Horizontal or Vertical control. Bad sound quality Make sure that the audio output mode is set correctly. Make sure that the audio connection between the unit and amplifier (if used) is secure. The TV doesn't operate normally Disconnect the power plug for ten seconds, then reconnect it. If the problem persists, contact Insignia or your dealer for help. Notes • If the problem is not fixed after you check the above items, do not attempt to remove the back cover by yourself. • You may hear a snapping sound from the TV occasionally. This is normal and is caused by temperature changes in the operating environment and does not affect the operation of the TV. • Do not let the TV remain on static images for long periods of time because it can result in permanent residual images on the screen. If this situation occurs, the TV may recover automatically after 12 hours if you change to dynamic programming. Maintaining Handling and cleaning the TV Shipping the TV Please save the original shipping carton and packing materials. If you need to ship the TV, for maximum protection, re-pack the it as it was originally packed at the factory. Keeping the exterior surfaces clean • Do not use volatile liquids such as insecticide spray near the TV. • Do not leave rubber or plastic products in contact with the TV for a long period of time because they can leave marks on the surface. Cleaning the case • To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. • Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the player. Maintaining the TV This TV is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use. For details, please contact your nearest authorized service center. www.insignia-products.com 11