Insignia NS-LCD26F User Manual (English) - Page 9

Insignia NS-LCD26F/NS-LCD32F LCD TV To enter a channel number directly: • Press the number buttons on the remote control. To switch between two channels: 1 Press RECALL to change from the currently tuned channel to the previous channel. 2 Press RECALL again to change back to the originally tuned channel. Changing the picture mode To change the picture mode: • Press PICTURE on the remote control to cycle through the following modes: • STANDARD-normal mode • SOFT-softens the image • USER-set the image effect you want • BRIGHT-suitable for sports images Programming channels into memory To select the channel source: 1 Press MENU on the TV or remote control, then press VOL- or VOL+ to access the TUNER menu. The TUNER menu opens. 3 The TV searches and memorizes all channels on the selected antenna input available in your area. 4 To stop the auto scan, press MENU. To edit programmed channels: 1 Press MENU on the TV or remote control, then press VOL- or VOL+ to access the TUNER menu. The TUNER menu opens. 2 Press CH- or CH+ to select EDIT PROGRAM, then press VOL- or VOL+ to enter the sub-menu. The Edit Program sub-menu opens. 2 Press CH- or CH+ to select CH.SOURCE, then press VOL- or VOL+ to choose CATV or AIR. To automatically program channels into memory: 1 Press MENU on the TV or remote control, then press VOL- or VOL+ to access the TUNER menu. The TUNER menu opens. 3 Press DIS./ZOOM to select the channel. Then you can: • Label the channel by pressing the VOL+ button. • Skip the channel by pressing the VOLbutton. • Delete the label and skip the channel by pressing the CH+ button. • Copy the label by pressing the CHbutton. 4 To cancel the action, press the VOL- button. 2 Press CH- or CH+ to select AUTO SCAN, then press VOL- or VOL+ to begin searching. www.insignia-products.com 7