Intel BOXDP67BA Product Specification - Page 46
Power Supply Connectors
View all Intel BOXDP67BA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Intel Desktop Board DP67BA Technical Product Specification 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • Main power - a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, attach that cable on the leftmost pins of the main power connector, leaving pins 11, 12, 23, and 24 unconnected. • Processor core power - a 2 x 2 connector. This connector provides power directly to the processor voltage regulator and must always be used. Failure to do so will prevent the board from booting. Table 21. Processor Core Power Connector Pin Signal Name Pin Signal Name 1 Ground 3 +12 V 2 Ground 4 +12 V Table 22. Main Power Connector Pin Signal Name 1 +3.3 V 2 +3.3 V Pin Signal Name 13 +3.3 V 14 -12 V 3 Ground 15 Ground 4 +5 V 5 Ground 6 +5 V 7 Ground 16 PS-ON# (power supply remote on/off) 17 Ground 18 Ground 19 Ground 8 PWRGD (Power Good) 9 +5 V (Standby) 10 +12 V 11 +12 V (Note) 12 2 x 12 connector detect (Note) 20 No connect 21 +5 V 22 +5 V 23 +5 V (Note) 24 Ground (Note) Note: When using a 2 x 10 power supply cable, this pin will be unconnected. For information about Power supply considerations Refer to Section 2.5.1 on page 53 46