Intel BOXDP67BA Product Specification - Page 50
Jumper Block
View all Intel BOXDP67BA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Intel Desktop Board DP67BA Technical Product Specification 2.3 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 13 shows the location of the jumper block. The 3-pin jumper block determines the BIOS Setup program's mode. Table 28 describes the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. Figure 13. Location of the Jumper Block 50
Intel Desktop Board DP67BA Technical Product Specification
50
2.3
Jumper Block
CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting.
Otherwise, the
board could be damaged.
Figure 13 shows the location of the jumper block.
The 3-pin jumper block determines
the BIOS Setup program’s mode.
Table 28 describes the jumper settings for the three
modes:
normal, configure, and recovery.
When the jumper is set to configure mode
and the computer is powered-up, the BIOS compares the processor version and the
microcode version in the BIOS and reports if the two match.
Figure 13.
Location of the Jumper Block