Intel DH55TC DH55TC Technical Product Specification - Page 49
Jumper Block
View all Intel DH55TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Technical Reference 2.3 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 14 shows the location of the jumper block. The 3-pin jumper block determines the BIOS Setup program's mode. Table 26 describes the jumper settings for the three modes: normal, configure, and recovery. Figure 14. Location of the Jumper Block 49
Technical Reference
49
2.3
Jumper Block
CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting.
Otherwise, the
board could be damaged.
Figure 14 shows the location of the jumper block.
The 3-pin jumper block determines
the BIOS Setup program’s mode.
Table 26 describes the jumper settings for the three
modes:
normal, configure, and recovery.
Figure 14.
Location of the Jumper Block