Invacare L-4R Owners Manual - Page 22

5 INSPECTION Inspect/Adjust Initially ❑ Ensure powered scooter drives straight (no excessive drag or pull to one side). ❑ Check frame for damage and corrosion. ❑ Ensure that the brake release lever is easy to engage/disengage. ❑ Ensure that tiller adjustment mechanism engages and disengages properly and securely. ❑ Ensure that the scooter stops completely when throttle is released (i.e., does not continue to roll as if the throttle is activated). ❑ Clean upholstery and armrests. ❑ Ensure armrest pad sits flush against arm tube. ❑ Inspect the seat upholstery for rips and tears. ❑ Inspect seat swivel for release and engagement (seat locks into the determined swivel positions). ❑ Inspect for excessive side movement or binding when the drive wheels are raised or turned. ❑ Inspect front wheel/fork assembly for proper tension by spinning the wheel. The front wheel should come to a gradual stop. ❑ Check the front fork for damage or corrosion. ❑ Tighten locknut if the front wheel wobbles noticeably or loosen locknut if the wheel binds to a stop. ❑ Ensure that wheel bearings are clean and free of moisture. ❑ Ensure that the bolts and fasteners on the caster assemblies are tight. ❑ Inspect tires for flat spots and wear. ❑ Clean molded body shrouds. ❑ Check that all labels are present and legible. Inspect/Adjust Weekly ❑ Ensure that tiller adjustment mechanism engages and disengages properly and securely. ❑ Ensure that the scooter stops completely when throttle is released (i.e., does not continue to roll as if the throttle is activated). ❑ Inspect tires for flat spots and wear. Lynx™L-3 & Lynx L-4 Scooters 22 Part No. 1143205