JVC GY-DV5000U Wireless Peer-to-Peer Connections from Streamcorder to Computer

JVC GY-DV5000U - 3-ccd Professional Dv Camcorder Manual

JVC GY-DV5000U manual content summary:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

Page 1 of 7
JVC
PROFESSIONAL
PRODUCTS
COMPANY
Application Note 4
Subject:
Wireless Peer-to-Peer Connections from Streamcorder to Computer
This application note applies to the GY-DV300, GY-DV5000 and BR-DV6000
Streamcorders equipped with optional network packs KA-DV300/350, KA-DV5000 or
SA-DV6000
Objective
Successfully connecting your Streamcorder to a computer using wireless network interface cards (WLANs)
involves installation and configuration of a KA-DV300/350, KA-DV5000 or SA-DV6000 Network Pack, including a
WLAN card, and (installing and) configuring your computers’ WLAN network interface.
This Application Note describes connecting a single Streamcorder connected directly to a single computer in an AD
HOC configuration, with no switch, hub, or access point present.
Other connection strategies are described in
other Application notes.
System Components
There are five components, or ‘blocks’ required when connecting a Streamcorder to a computer as shown here.
Other than the obvious components, i.e., a computer and a Streamcorder, you need a network pack with a wireless
network interface (WLAN) card, and another WLAN card for the computer.
Only the following WLAN cards are supported by the Streamcorder network pack.
Any WLAN card can be used in
the computer:
GY-DV300/GY-DV5000/BR-DV6000
Network Pack
WLAN
Computer
WLAN