JVC GY-DV5000U Wireless Peer-to-Peer Connections from Streamcorder to Computer - Page 1

 JVC PROFESSIONAL PRODUCTS COMPANY Subject: Application Note 4 Wireless Peer-to-Peer Connections from Streamcorder to Computer This application note applies to the GY-DV300, GY-DV5000 and BR-DV6000 Streamcorders equipped with optional network packs KA-DV300/350, KA-DV5000 or SA-DV6000 Objective Successfully connecting your Streamcorder to a computer using wireless network interface cards (WLANs) involves installation and configuration of a KA-DV300/350, KA-DV5000 or SA-DV6000 Network Pack, including a WLAN card, and (installing and) configuring your computers' WLAN network interface. This Application Note describes connecting a single Streamcorder connected directly to a single computer in an AD HOC configuration, with no switch, hub, or access point present. Other connection strategies are described in other Application notes. System Components There are five components, or 'blocks' required when connecting a Streamcorder to a computer as shown here. GY-DV300/GY-DV5000/BR-DV6000 Computer Network Pack WLAN WLAN Other than the obvious components, i.e., a computer and a Streamcorder, you need a network pack with a wireless network interface (WLAN) card, and another WLAN card for the computer. Only the following WLAN cards are supported by the Streamcorder network pack. Any WLAN card can be used in the computer: Page 1 of 7