JVC JY-VS200U JY-VS200U User Manual -- Pages 2-35 (1231KB) - Page 30

EN31 DEMO MODE OFF ON MIC IND. OFF ON COLOR OFF BAR ON ON LCD SCREEN LCD/TV DATE/ TIME OFF AUTO TIME CODE ON OFF ON CLOCK ADJ. QUALITY SIZE UXGA Automatic demonstration will not take place. Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. When "DEMO MODE" is set to "ON" and the Menu Screen is closed, demonstration starts. Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume. NOTES: ● If a tape is in the camcorder, the demonstration cannot be turned on. ● "DEMO MODE" remains "ON" even if the camcorder power is turned off. ● If "DEMO MODE" remains "ON", some functions will not be available. After viewing demo, set to "OFF". Microphone Level Indicator does not appear. Microphone Level Indicator appears when recording starts, providing the operator with immediate visual confirmation that recording has started. Regardless of this setting, Microphone Level Indicator does not appear when the Power Switch is set to " ", " "* or "OFF". * Except Audio Dubbing mode. Color Bars do not appear. Color bars appear on screen which allows color settings to be adjusted quickly and easily for natural-looking picture reproduction. Regardless of this setting, color bars do not appear in the following cases: • When the Power Switch is set to " ", " " or "OFF". • When the Shooting Mode Switch is set to "UXGA" or "XGA/VGA". • When "WIDE MODE" is set to "PS-WIDE" in the Menu Screen. Keeps the camcorder 's display (except the date, time and time code) from appearing on the connected TV screen. Makes the camcorder 's display appear on screen when the camcorder is connected to a TV. The date/time does not appear. Displays the date/time for approx. 5 seconds in the following cases: • When the Power Switch is set from "OFF" to " " or " ". • When video playback starts. The camcorder displays the date/time when scenes are recorded. • When the date is changed during video playback. The date/time is always displayed. Time code is not displayed. Time code is displayed on the camcorder and on the connected TV . Frame numbers are not displayed during recording. Allows you to set the current date and time ( ੬ pg. 11). Refer to "Picture Mode Setting" (੬ pg. 16). : Factory-preset NOTES: ● " SYSTEM" and " DISPLAY" functions which are set when the Power Switch is set to " " are also applied when the Power Switch is set to " " (੬ pg. 41). "CLOCK ADJ." only appears when the Power Switch is set to " ". ● The " DISPLAY" settings are effective even when the Power Switch is set to " ". ● The "ON SCREEN" setting can also be changed by pressing the DISPLAY Button on the remote control (provided) (੬ pg. 55, 58, 66). JY-VS200U EN 02-35 31 01.3.12, 6:55 PM