JVC JY-VS200U JY-VS200U User Manual -- Pages 2-35 (1231KB) - Page 9

10 EN Power Zoom Lever Recording Start/Stop button Power Switch Shooting Mode Switch Diopter Adjustment Control GETTING STARTED (cont.) Grip Adjustment 1 Separate the Velcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Lever. Refasten the Velcro strip. Viewfinder Adjustment 1 Set the Power Switch to " " or " " while pressing down the Lock Button located on the switch. Set the Shooting Mode Switch to any position. 2 Pull out the viewfinder fully and adjust it manually for best viewability. 3 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused. PAUSE 13 2 Shoulder Strap Attachment Following the illustration, thread the strap 1 1 through the eyelet , then fold it back and 2 thread it through the buckle . Repeat the 3 procedure to attach the other end of the strap to the other eyelet , making sure the strap is not twisted. Tripod Mounting 1 Align the screw and camera direction stud on the tripod with the camera's mounting socket and stud hole. Then tighten the screw. •Some tripods are not equipped with studs. CAUTION: When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a smallsized tripod. JY-VS200U EN 02-35 10 01.3.12, 6:55 PM