JVC KD AVX1 Instructions - Page 23
EXTERNAL DEVICES, ENGLISH, Searching for available devices, Connecting a special device - specification
UPC - 046838017261
View all JVC KD AVX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ENGLISH 7 Operate the target Bluetooth device. Enter the same PIN code (as entered in the above step) on the device to be connected. Now connection is established and you can use the device through the unit. The device remains registered even after you disconnect the device. Use (or activate ) to connect the same device from next time. (☞ pages 45 and 46) Connecting a special device Perform steps 1 to 3 on page 22, then... 1 NEW DEVICE Dial Menu Message Open Search Special Device The unit displays the list of the preset devices. 2 Select a device you want to connect. Searching for available devices Perform steps 1 to 3 on page 22, then... 1 NEW DEVICE Dial Menu Message Open Search Special Device The unit searches for available devices and displays the list of them. (If no available device is detected, "Device Unfound" appears.) 2 Select a device you want to connect. 3 Enter the specific PIN code of the device to the unit. • Refer to the instructions supplied with the device to check the PIN code. 3 Use (or ) to connect. Connecting/disconnecting a registered device 1 Select "Bluetooth Phone" or "Bluetooth Audio," then select a registered device you want to connect/disconnect. 2 Perform steps 2 and 3 on page 22, then... • Select to connect the selected device. • Select to disconnect the selected device. 4 Use the Bluetooth device to connect. Now connection is established and you can use the device through the unit. You can set the unit to connect a Bluetooth device automatically when the unit is turned on. (☞ page 46) 23 EXTERNAL DEVICES