JVC KD AVX1 Instructions - Page 43

ENGLISH Equalizer Menu items Flat/Hard Rock/R&B/Pop/Jazz/ Dance/Country/Reggae/Classic/ User1/User2/User3 Selectable settings, [reference page] ☞ [35] Sound Menu items Fader/Balance Adjusts fader Adjust balance Volume Adjust Subwoofer High Pass Filter Crossover Amplifier Gain Selectable settings, [reference page] Adjust fader-speaker output balance between the front and rear speakers. • Upmost-front only • Downmost-rear only When using a two-speaker system, set the fader to the center (00). Adjust balance-speaker output balance between the left and right speakers. • Leftmost-left only • Rightmost-right only Adjust and store auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. -12 to +12; Initial 00 Adjust the settings below in the submenu: Phase : Subwoofer phase. Select either or , which reproduces a better sound. Level: Subwoofer output level. Level: -06 to +08; Initial 00 Through : Select when the subwoofer is not connected. On : Select when the subwoofer is connected. Adjust the crossover frequency between the front/rear speakers and the subwoofer. 80Hz, 120Hz, 150Hz You can change the maximum volume level of this unit. Off : Deactivates the built-in amplifier. Low Power : VOL 00 to 30 (Select this if the maximum power of the speakers is less than 50 W) High Power : VOL 00 to 50 43 SETTINGS