JVC KD-X270BT Instruction Manual America - Page 11
Getting Started
View all JVC KD-X270BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Basics Remote control (RM-RK52) (except for KD-SX26BT) This unit can be remotely controlled with an optionally purchased remote control. Remote sensor (Do not expose to bright sunlight.) Getting Started Pull out the insulation sheet when using for the first time. How to replace the battery To Adjust the volume Select a source On the remote control Press VOL + or VOL - . • Press and hold VOL + to continuously increase the volume to 15. Press d to mute the sound or pause playback. • Press again to cancel. The volume level returns to the previous level before muting or pause. Press SOURCE repeatedly. 1 Cancel the demonstration When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], see page 6), the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB" 1 Press the volume knob. [YES] is selected for the initial setup. 2 Press the volume knob again. "DEMO OFF" appears. 2 Set the clock and date 1 Press and hold . 2 Turn the volume knob to select [CLOCK], then press the knob. To adjust the clock 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob. Set the time in the order of "Hour" "Minute". 5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob. To set the date 7 Turn the volume knob to select [DATE SET], then press the knob. 8 Turn the volume knob to make the settings, then press the knob. Set the date in the order of "Day" "Month" "Year". ENGLISH 5