JVC KD-X270BT Instruction Manual America - Page 51
Wiring connection, IMPORTANT
View all JVC KD-X270BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Installation/Connection Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Fuse (10 A) Antenna terminal Ignition switch Car fuse block Separate red wire Make this connection if your vehicle factory wiring harness does not have "12 V ignition switch" wire. Light blue/yellow To the steering wheel remote control adapter Join the same color wires together. Blue/white: Remote (12 V 350 mA) Orange/white: Illumination Yellow: Battery 12 V Red: Ignition 12 V Black: Ground Gray: Front speaker/For 3-way crossover: Mid range speaker (right) Gray/black White: Front speaker/For 3-way crossover: Mid range speaker (left) White/black Purple: Rear speaker/For 3-way crossover: Tweeter (right) Purple/black Green: Rear speaker*/For 3-way crossover: Tweeter (left) Green/black * Blue: To power antenna Blue/white: To amplifier Brown (Not used) Vehicle dashboard Factory wiring harness (vehicle) Custom wiring harness (separately purchased) * You can also connect a subwoofer speaker directly using this lead without an external subwoofer amplifier. For setting, see page 32. Recommended connection ENGLISH 45