JVC KD-X270BT Instruction Manual America - Page 12
Set the basic settings - firmware update
View all JVC KD-X270BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Getting Started 9 Press to exit. To return to the previous setting item, press . 3 Set the basic settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. To return to the previous setting item, press . Default: [XX] [SYSTEM] [KEY BEEP] (Not applicable when 3-way crossover is selected.) (Page 30) [ON]: Activates the keypress tone. ; [OFF]: Deactivates. [SOURCE SELECT] [AM SRC]*1 [ON]: Enables AM in source selection. ; [OFF]: Disables. (Page 7, 9) [PANDORA SRC]*1 [ON]: Enables PANDORA/PANDORA BT in source selection. ; [OFF]: Disables. (Page 13) [SPOTIFY SRC]*1 [ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables. (Page 14) [BT AUDIO SRC]*1 [ON]: Enables BT AUDIO in source selection. ; [OFF]: Disables. (Page 26) [BUILT-IN AUX]*1 [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 12) [F/W UPDATE] [UPDATE SYSTEM]/[UPDATE HD] [F/W UP xxxx]/ [F/W UP Vxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated). For details on how to update the firmware, visit . [FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels. [CLOCK] [TIME SYNC] [ON]: The clock time is automatically set using the Clock Time (CT) data in FM Radio Broadcast Data System signal. ; [OFF]: Cancels. [CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels. [ENGLISH] [ESPANOL] [FRANCAIS]*2 Select the display language for menu and music information if applicable. By default, [ENGLISH] is selected. [DEMO MODE] [ON]: Activates the display demonstration automatically if no operation is done for about 15 seconds. ; [OFF]: Deactivates. *1 Not displayed when the corresponding source is selected. *2 Only for KD-X470BHS/KD-X370BTS/KD-X37MBS. 6 ENGLISH