JVC KW ADV790 Instructions - Page 51
Tuner
UPC - 046838033131
View all JVC KW ADV790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
ENGLISH Initial: Underlined Menu items D. Audio Output*3 Down Mix*3 Selectable settings, [reference page] Select the signal format emitted through the DIGITAL OUT (optical) terminal. (☞ also page 61) PCM : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS, or MPEG Audio, or when connecting to a recording device. Dolby D : Select this when connecting an amplifier or a decoder compatible with Dolby Digital. Stream : Select this when connecting an amplifier or a decoder compatible with Dolby Digital, DTS, or MPEG Audio. When playing back a multi-channel disc, this setting affects the signals reproduced through the LINE OUT terminals. Dolby SR : Select this to enjoy multi-channel surround audio by connecting an amplifier compatible with Dolby Surround. Stereo : Normally select this. Disc D. (Dynamic) Range Compres. (Compression)*3 IF Band Width Area Setting Sirius ID*4 You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. Auto: Select to apply the effect to multi-channel encoded software. On: Select to always use this function. Auto: Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. US : When using in North/Central/South America. FM/AM intervals are set to 200 kHz/10 kHz. Europe : When using in any other areas. FM/AM intervals are set to 50 kHz (100 kHz during auto search)/9 kHz. SA : When using in South American countries where FM interval is 100 kHz. AM interval is set to 10 kHz. Your SIRIUS identification number appears on the monitor. Tuner *4 Appears only when SIRIUS Satellite Radio is connected. 51 SETTINGS