JVC KW ADV790 Instructions - Page 52
Input, Others, Audio&Video
UPC - 046838033131
View all JVC KW ADV790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
ENGLISH Input The procedure for setting an item is shown on page 47. Menu items AV Input*1 External Input*3 Beep Telephone Muting Power LED Flash TouchPanel Sens. Initialize Selectable settings, [reference page] You can determine the use of LINE IN and VIDEO IN terminals. ☞ [42, 43] Off: Select when no component is connected ("AV-IN" is skipped while selecting the source). Audio&Video: Select when connecting an AV component such as a VCR. Audio: Select when connecting an audio component such as a portable audio player. Camera*2 : Select when connecting a rear view camera. Navigation : Select when connecting a Navigation System. For connecting an external component to the CD changer jack on the rear. Changer/iPod*4: CD changer or iPod. ☞ [34, 40] External: Any other than the above. ☞ [44] • For connecting the Bluetooth adapter, this setting is not required. It is automatically detected. Off: Cancels. On: Activates the key-touch tone. Off: Cancels. Muting1, Muting2: Select either one which mutes the sounds while using the cellular phone. Off: Cancels. On: When the ignition is turned off, the lamp on the flashes. button Change the sensitivity of the touch panel. As the number decreases, sensitivity becomes higher. 1/2/3 Initialize all settings you have made in . Press and hold [Enter] to initialize the settings, then reset the unit. ☞ [3] Others *1 Not selectable when "AV-IN" is selected as the source. *2 The REVERSE GEAR SIGNAL lead connection is required. See Installation/Connection Manual. The rear view through the camera appears on the screen in aspect ratio (regardless of the aspect ratio setting) when you shift the gear to the reverse (R) position. When you press DISP on the control panel, or when you shift the gear to another position other than the reverse (R) position, the rear view screen is cleared. *3 Not selectable when the component connected to the CD changer jack is selected as the source. *4 The name of the component detected through the CD changer jack is shown. 52