JVC KW-M865BW Quick Start Guide - Page 25
Controlling Audio
View all JVC KW-M865BW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Controlling Audio You can adjust various settings such as audio balance or subwoofer level. 1 Press the [FNC] button. 2 Touch [ ]. 3 Touch [ ]. 4 Touch [Audio]. Controlling Audio ÑÑEqualizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 Touch [EQ / SW Level]. 2 Touch the screen and set the Graphic Equalizer as desired. ÑÑControlling General Audio 1 Touch [Fader / Balance]. 2 Set each parameter as follows. ■■[Fader], [Balance] Adjust the volume balance around the touched area. [C] and [D] adjust the right and left volume balance. [R] and [S] adjust the front and rear volume balance. ■■ [Center] Clear the adjustment. ■■Gain level (area in dotted frame) Adjust the gain level by touching each frequency bar. You can select a frequency bar and adjust its level by [R], [S]. ■■[Preset Select] Display the screen for selecting the preset equalizer curve. ■■ [Memory] Saves the adjusted equalizer curve as "User1" to "User4". ■■ [Initialize] Initialize (flatten) the current EQ curve. ■■[ALL SRC] Apply the adjusted equalizer curve to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen. ■■[Bass EXT] (Bass Extend Settings) When turned on, the frequencies lower than 62.5 Hz is set to the same gain level (62.5 Hz). ■■[SW Level] Adjust the subwoofer volume. This setting is not available when Subwoofer is set to "None". English 25