JVC KW-M865BW Quick Start Guide - Page 30

Connection/Installation ÑÑ3-way speaker system setup ÑÑConnecting the system and external components 12 11 10 9 Subwoofer Preout Mid Range Preout Tweeter Preout When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit. Preout RCA Cable (Sold separately) Power amplifier (optional accessory) Speaker Input White + White/Black To mid range left speaker Gray + Gray/Black Green + To mid range right speaker To tweeter left speaker Green/Black Purple + To tweeter right Purple/Black speaker Speaker impedance: 4-8 Ω NOTE • For speaker system setup, see 3-way speaker system setup (P.79) in the Instruction Manual. • For speaker setup and crossover setup, see Speaker / X'over setup (P.78) in the Instruction Manual. • For how to connect speaker wires to terminals other than speaker terminals and Preout terminals, see Connecting the system and external components (P.30) and Connecting wires to terminals (P.29). 87 6 5 1 2 3 4 1 AV Audio output (ø3.5 mini jack) 2 FM/AM antenna input 3 When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit. Rear Audio Preout (Left; White, Right; Red) Front Audio Preout (Left; White, Right; Red) Subwoofer Preout (Left; White, Right; Red) 4 SiriusXM Connect Vehicle Tuner connector For more information on how to install the SiriusXM Connect Vehicle tuner, consult the installation guide included with the tuner. 5 iDatalink connector 6 This jack accepts either AV-IN (1; Left audio, 2; Right audio, 3; Ground, 4; VIDEO) or camera input. For more information, see To set up the camera assignment settings (P.33). --AV-IN input 1 234 --Camera input Accessory 9: Mini plug to RCA cable 30