JVC KW-M865BW Quick Start Guide - Page 8
Security Code Setup, Basic Operations, Camera Setup P.56
View all JVC KW-M865BW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Basic Operations ■■ [Camera] Set the parameters for the camera. 1 Touch [Camera]. 2 Set each item and touch [ ]. For details, see Camera Setup (P.56) in the Instruction Manual. ■■[OEM SETUP] This function requires a commercial adaptor. Consult your JVC dealer for details. ■■ [DEMO] Set the demonstration mode. Default is "ON". 2 Touch [Finish]. 3 Touch [ ]. 4 Touch [Security]. NOTE • These settings can be made from the SETUP menu. See Setup (P.70) in the Instruction Manual. Security Code Setup You can set up a security code to protect your receiver system against theft. When the Security Code function is activated, the code cannot be changed and the function cannot be deactivated. Note that the Security Code can be set with a 4 to 8 digit number of your choice. Preparation • Set [DEMO] to [OFF] in the Special screen. See Special Setup (P.73) in the Instruction Manual. 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 8 hhSecurity screen appears. 5 Touch [Security Code Set] on the Security screen. hhSecurity Code Set screen appears. 6 Enter a security code with 4 to 8 digits and touch [Enter]. 7 Enter the same code again and touch [Enter]. Now, your security code is registered. NOTE • Touch [BS] to delete the last entry. • If you enter a different security code, the procedure returns to step 6 (for first code entry). • If you have disconnected the Receiver from the battery, enter the correct security code as that you have entered in step 6 and touch [Enter]. You can use your receiver.