JVC KW-V120BT Instruction Manual - Page 12

DISCS Playing a disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types/file types, see page 67. ❏ Inserting a disc Insert a disc with the label side facing up. KW-V420BT ❏ Ejecting a disc KW-V420BT KW-V220BT KW-V120BT KW-V320BT Press [M] on the Home screen or "DISC" source control screen. Playback operations When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, see page 50. ❏ Indications and buttons on the source control screen For video playback 1 2 3 4 KW-V320BT KW-V220BT KW-V120BT The source changes to "DISC" and playback starts. • The IN indicator lights up while a disc is inserted. • If " " appears on the screen, the unit cannot accept the operation you have tried to do. - In some cases, without showing " ," operations will not be accepted. • When playing back a multi-channel encoded disc, the multi-channel signals are downmixed to stereo. • When removing a disc, pull it horizontally. • You can eject a disc when playing another AV source. • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. Closing the monitor panel (only for KW-V420BT) After removing the disc, press M on the monitor panel. The monitor panel closes. 5 67 Playback information • The information displayed on the screen differs depending on the type of disc/file being played back. 1 Media type 2 Playback status 3 Current playback item information (title no./ chapter no./folder no./file no./track no.) 4 Playing time 5 IN indicator 6 Playback mode (Page 15) 7 File type 12