JVC KW-V120BT Instruction Manual - Page 48
Setting the speakers-car type, speaker size and crossover frequency
View all JVC KW-V120BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
SETTINGS ❏ Setting the speakers-car type, speaker size and crossover frequency Preparation: Select the appropriate crossover network mode beforehand. (Page 47) 1 Display the screen. On the Home screen: 2 Select a car type (1), select the location of the speakers (2)*1, then display the screen (3). 3 Select the speaker type (1), select the size of the selected speaker (2), then display the is set to [2 way]. (Page 47) *2 Appears only when the front speakers are selected. *3 Adjustable only when is set to , , or on the screen. *4 Appears only when the front/tweeter or rear/mid range speakers are selected. *5 When
48
SETTINGS
SETTINGS
❏
Setting the speakers—car type,
speaker size and crossover frequency
Preparation:
Select the appropriate crossover network mode
beforehand. (Page
47)
1
Display the
<Car Setting>
screen.
On the Home screen:
2
Select a car type (
1
), select the location
of the speakers (
2
)*
1
, then display the
<Speaker Select>
screen (
3
).
3
Select the speaker type (
1
), select the size
of the selected speaker (
2
), then display
the
<X’over>
screen (
3
).
•
When a speaker is not connected, select
<None>
.
•
When setting the front speakers, also select
the speaker size for
<Tweeter>
.
4
Adjust the crossover frequency of the
selected speaker.
<TW Gain (L)>
/
<TW Gain (R)>
Adjusts the output volume of
the tweeter (left/right).
*
2
*
3
<TW FREQ>
Adjusts the crossover
frequency for the tweeter.
*
2
*
3
<Gain>
Adjusts the output volume of
the selected speaker.
<HPF FREQ>
Adjusts the crossover
frequency for the front or rear
speakers (high pass filter).*
4
<LPF FREQ>
Adjusts the crossover for the
subwoofer (low pass filter).*
5
<Slope>
Adjusts the crossover slope.*
6
<Phase>
Selects the phase for the
subwoofer.*
5
*
1
Speaker location selection is available only when
<X’over
Network>
is set to
[2 way]
. (Page
47)
*
2
Appears only when the front speakers are selected.
*
3
Adjustable only when
<Tweeter>
is set to
<Small>
,
<Middle>
, or
<Large>
on the
<Speaker Select>
screen.
*
4
Appears only when the front/tweeter or rear/mid range speakers
are selected.
*
5
When
<X’over Network>
is set to
[2 way]
(Page
47):
Appears only when the subwoofer is selected.
*
6
Not adjustable when
<HPF FREQ>
or
<LPF FREQ>
is set to
<Through>
.