JVC KW-V120BT Instruction Manual - Page 26

TUNER Listening to the radio ❏ Indications and buttons on the source control screen 12 3 45 Tuner reception information 1 Text information • Pressing [H] scrolls the text if not all of the text is shown. • Pressing [Radio Text] switches the information between Radio Text, Radio Text Plus, and PTY code. 2 The station frequency currently tuned in 3 TI indicator 4 ST/MONO indicator • The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. 5 Seek mode Operation buttons [ ]/[ ]*1 Displays the other operation button window. • To hide the window, press [ ]/ [ ]*1. [AM] Selects the AM band. [FM] Selects the FM band. [ ]*2 [P1] - [P5] [ ] [PTY]*3 [SEEK] [S] [T] [SSM ]*3 [MONO]*3 [TI]*3 Displays the preset station window. (Page 27) • To hide the window, press [ ]. • Selects a stored station. (Press) • Stores the current station. (Hold) Displays the screen. (Page 47) Enters PTY search mode. (Page 28) Changes the seek mode. • AUTO1: Auto Search • AUTO2: Tunes in stations in the memory one after another. • MANU: Manual Search Searches for a station. • The search method differs according to the selected seek mode. (See above.) Presets stations automatically. (Hold) (Page 27) Activates/deactivates monaural mode for better FM reception. (Stereo effect will be lost.) • The MONO indicator lights up while monaural mode is activated. Activates/deactivates TI standby reception mode. (Page 28) • To display all available operation buttons, press [ ]/[ ]*1 to display the other operation button window. *1 The appearance of the buttons differs depending on the model: [ ] or [ ] for KW-V420BT/KW-V220BT/KW-V120BT/[ ] or [ ] for KW-V320BT. *2 Only for KW-V420BT/KW-V220BT/KW-V120BT. *3 Appears only when FM is selected as the source. 26