JVC KW-XC777 Instruction Manual - Page 20
Storing your own sound, adjustments, LOW FREQ., LOW LEVEL, MID FREQ., MID LEVEL, back to the beginning
UPC - 046838105449
View all JVC KW-XC777 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ENGLISH Storing your own sound adjustments You can adjust the sound modes to your preference and store your own adjustments in memory (USER sound mode). • There is a time limit in doing the following procedure. If the setting is cancelled before you finish, start from step 1 again. 1 Select "EQ." EQ Canceled S.BASS L.V.METER 3 Adjust the selected sound element. • Refer to the table below for adjusting the selected sound element. Indication Range LOW FREQ. 50 Hz , 80 Hz , 120 Hz LOW LEVEL -06 (min.) - +06 (max.) MID FREQ. 700 Hz , 1 kHz , 2 kHz MID LEVEL -06 (min.) - +06 (max.) HIGH FREQ. 8 kHz , 12 kHz HIGH LEVEL -06 (min.) - +06 (max.) EQ level adjusted flashes. 2 Select sound elements to adjust. Each time you press the button, the sound elements to adjust change as follows: LOW FREQ.* LOW LEVEL MID FREQ.* MID LEVEL HIGH FREQ.* HIGH LEVEL (back to the beginning) EX.: When you adjust "LOW FREQ." 4 Repeat step 2 and 3 to adjust the other sound elements. 5 Store the adjustments. Your setting is stored in USER sound mode. FREQ. (LOW, MID, HIGH): Select the center frequency to adjust. LEVEL (LOW, MID, HIGH): Adjust the enhancement level. * By pressing ¢ or 4 , you can directly move as follows: LOW FREQ. MID FREQ. HIGH FREQ. 20