JVC KW-XC777 Instruction Manual - Page 22

ENGLISH OTHER MAIN FUNCTIONS Setting the clock Changing general settings (PSM) After installation, set the built-in clock correctly. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 23.) 2 If "CLOCK HOUR" does not appear, press ¢ or 4 repeatedly until it appears. You can change the following settings for this unit by using the PSM (Preferred Setting Mode) control. Basic Procedure • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 23.) 3 Adjust the hour. 2 Select a PSM item you want to adjust. (See page 23.) 4 3 Press ¢ or 4 until "CLOCK Adjust the PSM item selected. MIN (minute)" appears on the display. 5 Adjust the minute. 6 Finish the setting. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the setting. To check the current clock time while the unit is turned off, press DISP (display). The power turns on, the clock time is shown for 5 seconds, then the power turns off. 22