JVC KY-F560U KA-F5602U, KA-F5603U Studio kit for KY-F560U camera (47 page inst - Page 6

Thank you for purchasing this KA-F5602U / KA-5603U Studio Kit. This product is a kit meant for converting JVC's KY-F560 video camera into a studio camera. Model designation may differ depending on whether the Studio Kit is equipped with a SDI (Serial Digital Interface) terminal. Model KA-F5602U KA-F5603U SDI Output Terminal Nil Yes Main Features ● Equipped with analog 26P camera connector Connecting to Remote Control Unit RM-P210, which is sold separately, this unit could be controlled from up to a distance of 100 m away. In this case, power for the camera is provided by the remote control unit and thus there is no requirement for a separate power supply for the camera. ● Multi-system output From the 26P camera connector, besides the composite signal, another video signal which could be either RGB component, Y/Cb/Cr component, or YC separate signal could be outputted. (Selectable by menu switch.) ● Possible to install VF-P400 4-inch Viewfinder ● Equipped with intercom terminal With the use of headset, communications with remote control unit operator is possible. ● Equipped with prompter output terminal Prompter video from the remote control unit could be outputted in the form of composite signal. ● H phase and SC phase could be adjusted during synchronization. (Using menu screen) ● Equipped with SDI output terminal (Only for KA-F5603U) Camera video is output as serial digital video signal (SMPTE259M-compliant). 6