Jabra M5390 User Manual - Page 19
Using the Jabra M5390 Multiuse headset with multiple Bluetooth, enabled devices, Operating devices - multiuse bluetooth headset
UPC - 706487009276
View all Jabra M5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English 10. Using the Jabra M5390 Multiuse headset with multiple Bluetooth®-enabled devices Your Jabra M5390 Multiuse headset can be paired with up to 8 devices. However, only two can be connected (paired with the headset, turned on and in range) with the headset at one time. This could be any two Bluetooth® devices (for example, a cell phone and the Jabra M5390 Multiuse base, or the Jabra A335w Dongle and a cell phone, or two cell phones). Therefore, if the headset is in range of the Jabra M5390 Multiuse base or Jabra A335w Dongle, only one additional Bluetooth® device can be connected to the headset (paired with the headset, turned on and in range). The headset is by default paired with the base and the dongle. This means that the headset will automatically connect to these two devices from the factory if in range and turned on. Therefore, if a cell phone needs to be connected to the headset, either the dongle or base has to be turned off or placed out of range. It is also possible to have two Bluetooth®-enabled cell phones connected to the Jabra M5390 Multiuse headset simultaneously. In this case, both the base and the dongle should be disconnected from the headset. 11. Operating devices in multiuse scenarios Using the button interface of the headset, it is possible to operate both connected devices in a multiuse scenario (the two devices connected to the headset). Operations can be divided into receiving incoming and placing outgoing calls. If receiving an incoming call from either of the connected devices, this device will automatically be the device "in use" and a tap of the button will answer the call. Press the buttone to cancel the call. If you would like to place an outgoing call activated from the headset, you must manually place one of the devices "in use". When a device is placed "in use", everytime a button is pressed on the headset, the instruction is sent to the selected device. For example, if you wish to make a call using Voice Dial on the second connected device, you must first make sure that the second device is "in use". After confirming the device is "in use", simply tap the button to activate Voice Dial. In order to switch between the two connected devices, press the Answer/End button for app. 1.5 seconds. After swaping the "in use" status of two devices, different indicators will be used to indicate which device is now "in use"; When activating the Jabra A335w dongle as "in use", the LED of the dongle will give 5 quick light-blue flashes. Also the speaker of the headset will say "Dongle in focus". When activating the Jabra M5390 base as "in use", the LED on the base will give 5 quick light-blue flashes. Also the speaker of the headset will say "Base in focus". When activating a cell phone as "in use" the speaker of the headset will say "Mobile in focus". Please note that this only applies to multiuse scenarios. If the headset is only connected to one device, then this device will automatically be "in focus". Also note that the Last Number Redial command does not use the "in focus" concept. Upon double tapping the Answer/End button, the Last Number Redial command will automatically be sent to the connected device with the most recent incoming call (which was received while connected to the headset). 16