Kenwood DDX419 Instruction Manual - Page 48
Setting menu items
View all Kenwood DDX419 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Setting menu items • You cannot change settings when the unit is in standby. Menu item Selectable setting/item Initial: Underlined Fader/Balance Fader : Adjust the front and rear speaker output balance. ♦ F6 to R6; Initial 0 • When using a two-speaker system, set the fader to the center (0). Balance : Adjust the left and right speaker output balance. ♦ L6 to R6; Initial 0 Press [5/∞/2/3] or drag [ ] to adjust. • To clear the adjustment, press [Center]. Equalizer Change the sound mode or adjust and store the equalization for each source. (☞ page 41) ♦ Natural/Rock/Pops/Easy/Top40/Jazz/User Audio Loudness X'over You can activate/deactivate the loudness function. ♦ OFF : Cancels. ♦ ON : Boost low and high frequencies to produce a well-balanced sound at a low volume level. The LOUD indicator lights up. Adjust the cross over frequency. (☞ page 42) Volume Offset Adjust and store the auto-adjustment volume level for each source. (For discs, the adjustment is stored for each of the following categories: DVD/DVD-VR, VCD/CD, and DivX/ MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The volume level will automatically increase or decrease when you change the source. ♦ -15 to +6; Initial 0 Subwoofer ♦ ON ♦ OFF : Activates the subwoofer. : Cancels. Speaker Select Select the size of the connected speaker. ♦ Standard/Narrow/Middle/Wide 48 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049