Kenwood DDX419 Instruction Manual - Page 82
Installing the Microphone, Unit DDX719/DDX7049BT, DDX419/DDX4049BT only, Removing the Unit, DDX419/
View all Kenwood DDX419 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Removing the Unit (DDX419/DDX4049BT/ DDX319/DDX3049 only) 1 Remove the escutcheon by referring to the removal procedure in the section . 2 Insert the two removal tools 6 deeply into the slots on each side, as shown. Accessory 6 Installing the Microphone Unit (DDX719/DDX7049BT/ DDX419/DDX4049BT only) 1 Check the installation position of the microphone (accessory 9). 2 Remove oil and other dirt from the installation surface. 3 Install the microphone. 4 Wire the microphone cable up to the unit with it secured at several positions using tape or the like. ⁄ • Install the microphone as far as possible from the cell-phone. 3 Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside. Accessory 9 Fix a cable with a commercial item of tape. ⁄ • Be careful to avoid injury from the catch pins on the removal tool. 4 Pull the unit all the way out with your hands, being careful not to drop it. Peel the release coated paper of double-face adhesive tape to fix on the place shown above. Adjust the direction of the microphone to the driver. 82 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049