Kenwood DNX573S Instruction manual - Page 95
Equalizer Control, Recall the EQ curve
View all Kenwood DNX573S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Controlling Audio Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 Press the button/ volume knob. Popup menu appears. 2 Touch [Audio]. Audio screen appears. 3 Touch [Equalizer]. Equalizer screen appears. 4 Touch the screen and set the Graphic Equalizer as desired. Memory Saves the adjusted equalizer curve to "User1" to "User4". Initialize The current EQ curve returns to flat. ALL SRC Apply the adjusted equalizer to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen. Bass EXT (Bass Extend Settings) When turned on, the frequency lower than 62.5 Hz is set to the same gain level as 62.5 Hz. SW Level Adjusts the subwoofer volume. This setting is not available when subwoofer is set to "None". See Speaker/ X'over setup (P.90). Recall the EQ curve 1 Touch [Preset Select]. 2 Select EQ curve. Gain level (light green boxed area) Adjust the gain level by touching the each frequency bar. You can select frequency bar and adjust its level by [R], [S]. Preset Select Displays the screen to recall the preset equalizer curve. 94 NOTE • [iPod] is available only during iPod source.