Kenwood DNX6180 Quick Start Guide - Page 11

How To Play Media Disc media iPod 0 1 sec. Press [0] for 1 second to open/close the front panel. If a disc is already inserted, it is ejected by press [0] for 1 second. Notes • Playable discs: DVD-Video, DVD±R/RW, DVD±DL, CD, CD-ROM/R/RW, Video CD • Playable disc file format: ISO 9660 Level 1/2, Joliet, Romeo, Long file name • Playable Audio files: AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Acceptable Video files: MPEG1 (.mpg, .mpeg, .m1v), MPEG2 (.mpg, .mpeg, .m2v), DivX (.divx, .div, .avi) USB device To disconnect the iPod, stop the playback by touching [0] on the source control screen, and then disconnect the iPod. Notes • When Connecting Two iPods: When iPod1 is disconnected, you cannot listen to the iPod2's music. Connect iPod2 to the iPod1 terminal. SD card This SD card slot is used to upgrade the Navigation System. For how to upgrade the Navigation System, refer to the instruction manual of the navigation system. 0 To disconnect the USB device, touch [0] on the source control screen, and then disconnect the USB device. Notes • Acceptable media: mass-storage-class USB device • Playable USB device file system: FAT16, FAT32 • Playable Audio files: AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), Linear PCM (WAVE) (.wav) • Acceptable Video files: MPEG1 (.mpg, .mpeg, .m1v), MPEG2 (.mpg, .mpeg, .m2v), H.264/MPEG4 AVC (.mp4, .m4v), WMV 9 (.wmv, .m2ts) 3 sec. Press [0] for longer than 3 seconds to open the front panel. Inserting the SD card Hold the SD card with the label side up and the notched section on the right, and insert it into the slot until it clicks. Removing the SD card Push the SD card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your fingers. Press [0] for longer than 1 second to close the front panel. English | 11