Kenwood DNX6180 Quick Start Guide - Page 29

Removing Monitor/Player Unit

Get Kenwood DNX6180 PDF manuals and user guides
UPC - 019048192714
View all Kenwood DNX6180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Removing Monitor/Player Unit Removing the Hard Rubber Frame (escutcheon) 1. Engage the catch pins on the removal tool 5 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Accessory 5 Removing the Unit 1. Remove the hard rubber frame by referring to the removal procedure in the section . 2. Insert the two removal tools 5 deeply into the slots on each side, as shown. Accessory 5 Catch Lock ⁄ • The frame can be removed from the top side in the same manner. 2. When the lower level is removed, remove the upper two locations. 3. Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside. ⁄ • Be careful to avoid injury from the catch pins on the removal tool. 4. Pull the unit all the way out with your hands, being careful not to drop it. English | 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
English
|
29
Removing Monitor/Player Unit
Removing the Hard Rubber
Frame (escutcheon)
1. Engage the catch pins on the removal tool
5
and remove the two locks on the lower
level.
Lower the frame and pull it forward as
shown in the figure.
Accessory
5
Lock
Catch
/
• The frame can be removed from the top side in
the same manner.
2. When the lower level is removed, remove
the upper two locations.
Removing the Unit
1. Remove the hard rubber frame by referring
to the removal procedure in the section
<Removing the Hard Rubber Frame>.
2. Insert the two removal tools
5
deeply into
the slots on each side, as shown.
Accessory
5
3. Lower the removal tool toward the
bottom, and pull out the unit halfway
while pressing towards the inside.
/
• Be careful to avoid injury from the catch pins on
the removal tool.
4. Pull the unit all the way out with your
hands, being careful not to drop it.