Kenwood KMR-D772BT Instruction manual - Page 28
Settings, Auto Answer, Battery/signal, Call History, Phone Book, Number Dial, Or Using The Remote
View all Kenwood KMR-D772BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
BLUETOOTH® Default: XX SETTINGS AUTO ANSWER 1 to 30: The unit answers incoming call automatically in the selected time (in seconds). ; OFF: Cancels. BATTERY/SIGNAL* AUTO: Shows the strength of the battery and signal when the unit detects a Bluetooth device and the Bluetooth device is connected. ; OFF: Cancels. * Functionality depends on the type of the phone used. CALL HISTORY PHONE BOOK Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. "(First device name)" appears. • If two Bluetooth phones are connected, press again to switch to another phone. "(Second device name)" appears. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold to exit. To return to the previous setting item, press . NUMBER DIAL (Applicable only if the phone supports PBAP.) 1 Press the volume knob to select a name or a phone number. • "INCOMING", "OUTGOING", or "MISSED" is shown on the lower part of the display to indicate the previous call status. • Press DISP to change the display category (NUMBER or NAME). • "NO DATA" appears if there is no recorded call history. 2 Press the volume knob to call. (Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts). The first menu (ABCDEFGHIJKLMN) appears. • To go to the other menu (OPQRSTUVWXYZ1 ), press J / K. • To select the desired first letter, turn the volume knob or press S / T, then press the knob. Select "1" to search with numbers and select " " to search with symbols. 2 Turn the volume knob to select a name, then press the knob. 3 Turn the volume knob to select a phone number, then press the knob to call. • The phonebook of the connected phone is automatically transferred to the unit when pairing. • Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL. • This unit can display only non-accent letters. (Accent letters such as "Ú" is shown as "U".) 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 2 Press S / T to move the entry position. Repeat steps 1 and 2 until you finish entering the phone number. 3 Press the volume knob to call. (or using the remote control) 1 Press the number buttons (0 to 9) to enter the phone number. 2 Press to call. 24 ENGLISH