Kenwood VRS-7200 Instruction Manual - Page 26
Recording
View all Kenwood VRS-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Recording Analog sources INPUT SELECTOR ↓ 1 Use the INPUT SELECTOR key (or the input selector key) to select the source (other than "VIDEO 1") you want to record. 2 Put the component connected to the VIDEO 1 jacks to the record-pause mode. 3 Start playback, then start recording. ÷ Recording may not be normal for some video software. This is due to the copy guard condition. Digital sources Switch on the REC MODE to record a digital input source. When the digital input source changes during recording in the REC MODE, the audio signal may be interrupted momentarily. The display switches automatically. 4 Start playback, then start recording. Recording music in REC mode When a multi-channel source such as the Dolby Digital or DTS input signal is recorded in REC mode, the multi channel signal in the current surround mode can be recorded down-mixed to 2-channel. ÷ DTS 5.1 MUSIC DISC (DTS CD) cannot be recorded. INPUT SELECTOR SETUP 1 Use the INPUT SELECTOR key (or the input selector keys) to select the source ("DVD", "VIDEO 2", "AUX" or "GAME") you want to record. 2 Put the component connected to the VIDEO 1 jacks to the record-pause mode. 3 Press and hold the SETUP key for more than 2 seconds to select the "REC MODE". 1 REC mode off 2 "REC MODE": REC mode on Multi-channel digital signals (DTS or Dolby Digital) are down-mixed to 2-channel before being output from the analog recording (REC OUT) jacks. 26 EN